Addonics Technologies ADSA3GPX8-4E Manuel d'utilisateur télécharger pdf

BIOS Jumper (J4)

Enable BIOS (1-2) – RAID firmware is active

Disable BIOS (2-3) – Base firmware is active

By default, the BIOS jumper is set to enable BIOS (1-2) for the ADSA3GPX8-4E. This means that when

you boot into a system, after POST, the RAID BIOS of the controller card with the attach devices shows

up. The RAID driver needs to be installed.

If the BIOS jumper is set to disable BIOS (2-3) when you boot into a system, after POST, the RAID BIOS

of the controller card does NOT show up. The BASE driver needs to be installed.

T E C H N O L O G I E S

User Guide

4 Port eSATA RAID5/JBOD

PCI-E 8x Controller

(ADSA3GPX8-4E)

BIOS Jumper (J4)

Fan

Hard Drive Activity LED

Jumper Connections

eSATA Ports

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

v4.1.11

1 2

User Guide 1

Résumé du contenu

Page 1 - User Guide

BIOS Jumper (J4)Enable BIOS (1-2) – RAID firmware is activeDisable BIOS (2-3) – Base firmware is activeBy default, the BIOS jumper is set to enable BI

Page 2

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/Software Installation for R

Commentaires sur ces manuels

Pas de commentaire

Addonics Technologies ADSA3GPX8-4E Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Contrôleurs RAID Addonics Technologies ADSA3GPX8-4E. Addonics Technologies ADSA3GPX8-4E User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôleurs RAID Addonics Technologies ADSA3GPX8-4E