Addonics Technologies RR2035RSDMS Manuel d'utilisateur Page 4
- Page / 12
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
1. Be sure the lock on each drive door is in an unlock position. If not, use the key
that comes with the Disk Array to unlock the drive door. Pull on the door lever to
swing open the drive door all the way.
2. Slide a 3.5” SATA hard drive into the drive slot with the drive connector side
facing in. Be sure to orient the hard drive correctly as shown in the yellow label
on the inside of the drive door – with drive door swing open at the bottom, the
top of the hard drive should face to the right. The drive should slide all the way
into the slot with very little resistance. Forcing the drive into the slot will cause
drive damage or permanent damage to the Disk Array.
3. Once the drive is all the way into the drive slot, close the door all the way till the
drive door latch securely. This will engage power and data connection with the
hard drive. The LED lit for the drive slot should lit if the Disk Array already
powered on. You may lock the drive door with the key.
4. To remove the hard drive from the Disk Array, simply follow the step 2 – 3 in
reverse.
Installing drives into the RAID Rack
Door lock
Individual drive
bay door
Insert hard drives
with top facing right
Power & Activity LED for
each drive bay
Main Power LED
for each array
Produits connexes et manuels pour Réseaux de disques Addonics Technologies RR2035RSDMS
(2 pages)Baumfolder BAUM20: Pile Folder 16page (from mid 2006) manuály
Uživatelské manuály a uživatelské příručky pro Zařízení Baumfolder BAUM20: Pile Folder 16page (from mid 2006).
Poskytujeme 1 manuály pdf Baumfolder BAUM20: Pile Folder 16page (from mid 2006) ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Commentaires sur ces manuels